DC/DC converter 24V to 48V

Power (kW): 5 kW

Input (U_Hi): 30 – 58VDC

Output (U_Lo): 0 – 58VDC (U_Hi < U_Lo)

Interface: CAN 2.0

Certification:
Safety: EN62368-1
Emission: EN61000-6-4

Data sheet DDL2148-24

Would you like to find out more about the DDL2148-24?
Here you will find detailed technical data sheets for our DDL2148-24.

Product features DC/DC converter 24V to 48V

Hardware

The DDL2148-24 is a non-isolated DC/DC converter for low voltages that enables bidirectional energy transfer between two connections (port A and port B). In buck mode, the converter reduces the voltage when power is transferred from port A to port B. In reverse transmission from port B to port A, it operates in boost mode, increasing the voltage level at port A. In addition, port C, parallel to port A, is equipped with an inrush current limiter as a special input.

24V output: A further 24VDC output with an output of 150W is suitable for supplying connected control units, fans or sensors.

CAN bus system: The CAN bus system, which is fully customizable by the user, allows all parameters to be configured and all measured values and status messages to be read out.

Sleep pin: The converter has a customizable sleep mode function that reduces energy consumption during maintenance work or rest periods.

Sense line: In addition, the connected energy storage system can be monitored via sense lines, allowing the energy flow to be regulated accordingly.

Housing: Integration in other housings possible.

Cooling: Contact cooling due to high efficiency.

Safety: Overtemperature, open-circuit and short-circuit proof.

Software

The DDL2148-24 comprises a comprehensive software package with a modular structure in terms of various functions.

Real-time diagnostics: Various measured values such as voltage, current levels and temperatures can be called up. Together with status and error messages, this enables the user or a higher-level control system to carry out comprehensive process diagnostics and respond to various events.

Setpoints: The user has the option of adjusting various parameters either by factory setting or during operation via the communication interface. Not only can current and voltage controls be carried out, but threshold values and limit values can also be defined.

Interface: The CAN2.0B bus, which is available as standard, can also be configured during operation. This allows the user to independently change the baud rate, the ID length and the identifiers of the frames. The cyclical transmission behavior of the frames can also be adjusted.

Options: Customer-specific charging and trickle charging functions as well as special, event-based behavior can be implemented with minimal effort. It is also possible to implement short-circuit and overload management or power reduction (derating) in the event of overtemperature.

REVIVE GmbH

Application: Supply of electrical consumers in logistics

Integration: Bidirectional coupling of the 24V network of a truck tractor with a 48V energy storage system on the truck trailer

Result: Elimination of hydraulic units with a corresponding reduction in pollutant emissions and noise levels.